When vehicle is in reverse, 4 rear bumper sensors send out ultrasonic waves 4 times per second that detect an obstacle behind the vehicle up to 8 feet away. The waterproof controller receives the signal and transmits to the LED display with built-in speaker alert.

The rear mounted LED display and speaker with 20’ cable sounds long intermittent beeps when an obstacle is within 8’ of the rear of the vehicle. As the rear of the vehicle moves closer to the obstacle, the beep increases in frequency. Once that distance is 1’, the alert becomes a continuous sound.

Power is supplied by tapping into reverse lights. The system is activated only when vehicle is on and in reverse.

- Premium Rear-Mounted LED Display
- Waterproof Controller
- Commercial Series
- 8’ Detection Sensors

System Includes:
Waterproof Controller - four rear 22mm sensors with 9’ cable – four 7 degree wedges – speaker with built-in mute with 30’ cable – drill bit – scotch lock and owner’s manual/installation instructions

This system also includes Four Sensor Brackets that attach under the bumper when permanent in-bumper installation is not the preferred choice.

Waterproof Controller: one of the premium features of this system is its waterproof controller unit which can be placed on the underside of the car eliminating “in trunk” controller installation.