When vehicle is in reverse, 4 rear bumper sensors send out ultrasonic waves 4 times per second that detect an obstacle behind the vehicle up to 8 feet away. The waterproof controller receives the signal and transmits to the LED display with built-in speaker alert.

The LCD display speaker with 30’ cable sounds long intermittent beeps when an obstacle is within 8’ of the rear of the vehicle. As the rear of the vehicle moves closer to the obstacle, the beep increases in frequency. Once that distance is 1’, the alert becomes a continuous sound.

Power is supplied by tapping into reverse lights. The system is activated only when vehicle is on and in reverse.

- Premium LCD Display
- Waterproof Controller
- Commercial Series
- 8’ Detection Sensors

System Includes:
Waterproof Controller - four rear 22mm sensors with 9’ cable – four 7 degree wedges - Premium LCD display with 30’ cable – drill bit – scotch lock and owner’s manual/installation instructions

This system also includes Four Sensor Brackets that attach under the bumper when permanent in-bumper installation is not the preferred choice.

Premium LCD Display: This premium display provides clear crisp visual information and includes a built-in speaker alert with mute feature. The display shows distance to impact up to 8’ from the rear of the vehicle and indicates on which the side of the vehicle the obstacle is located.