Ensure the weight of your load is distributed correctly when you purchase the Weigh Safe SWS6-2.5 Steel 2.5" Drop Hitch - 6" Drop from XDP. You had to use ineffective bathroom scales, go to the weigh station, or buy a separate tongue weight scale before this ball mount. This installation allows the built-in scale to easily and accurately measure your tongue weight. A built-in scale on the Weigh Safe Drop Hitch helps you adjust your load before you leave. You can tow much more safely and efficiently if the tongue weight of what you're hauling is properly adjusted. Using the built-in scale is as simple as hooking-up your trailer to the Weigh Safe ball mount just as you would with any other ball mount. The weight of your trailer will push down on the hitch ball, which in turn pushes down on an internal hydraulic piston that sits on a bed of oil. When the piston drops into the oil, the pressure reading is sent out to the scale.
Features:
- Made In The USA
- Helps Balance Your Trailer
- Simple Operation
- Tongue Weight Scale Built Into The Ball Mount Platform
- Hitch Constructed From High-Quality Steel
- Includes Stainless Steel 2" & 2-5/16" Tow Balls
- Promotes Safe Towing
What is tongue weight and why is it important?
Tongue weight
(TW) refers to the weight that the fully loaded trailer exerts downward
on the hitch ball of the tow vehicle. Tongue weight is typically 10
percent - and should not exceed 15 percent - of your gross trailer
weight. For example, a 10,000-lb trailer should have a tongue weight
between 1,000 lbs and 1,500 lbs. You can adjust the tongue weight of
your trailer by removing or adding cargo, or redistributing the load on
the trailer. The tongue weight should not exceed the capacity of your
tow vehicle, your hitch, or any of your towing components.
Simply
put, too little tongue weight can cause trailer sway and too much
tongue weight can cause the tow vehicle to perform poorly. You may have
difficulty steering, gaining traction, or braking when driving a setup
that has too much weight pushing down on the rear of the vehicle.
Ultimately, towing with an improper tongue weight can cause you to lose
control of your vehicle or cause your trailer to separate from the
vehicle.
Kit Includes:
(1) Drawbar
(1) Slider with Gauge
(1) 2" Stainless Steel Ball
(1) 2-5/16" Stainless Steel Ball
(1) Ball Retaining Pin
(1) Lock Plate Key Assembly
(1) Dust Lock Cover
Specifications:
Built-in Scale: Yes
Drop: 6"
Shaft: 2.5"
Ball: 2" & 2-5/16" Stainless Steel Balls Included
Max GTW: 22,000 lbs - 2-5/16" Ball (2.5" Shaft), 8,000 lbs - 2" Ball
Max Tongue: 2,200 lbs (2.5" Shaft)
V5 & J684 certified: Yes
Drop Hitch Adjustment: 1" Increments
Weight: 35 Lbs - 2.5" Shank
Ball Material: Stainless Steel
Pin: Dual Pin Key Lock Assembly Included
Rise: All Hitches May Be Used In Rise Position *Gain 1 Inch (E.G. 6" Drops Are 7" Rises)
Total Height: Add 3 Inches (*E.G. 6" Drops Measure 9" From The Top Of The Receiver To The Hitch Base)
Hitch Pin Hole: 5/8" Diameter
Compatible with Clam Shell: Yes
Stowable: Yes
WARRANTY INFO:
Limited Lifetime