The Weigh Safe SWS6-2.5-PATB Steel 2.5" Pintle Hitch & Tow Balls - 6" Drop from XDP covers your towing needs. Using the built-in scale is as simple as hooking-up your trailer to the Weigh Safe Hitch just as you would with any other ball mount. The weight of your trailer will push down on the pintle attachment or tow ball, which in turn pushes down on an internal hydraulic piston that sits on a bed of oil. When the piston drops into the oil, the pressure reading is sent out to the scale. This Weigh Safe Hitch helps you figure out if your payload needs to be adjusted before towing thanks to an integrated weight scale. This results in a safer and more pleasurable towing experience when you ensure the weight of your load is distributed appropriately. In the past, you had to use ineffective bathroom scales, visit a weigh station, or buy a separate tongue weight scale to determine the trailer's tongue weight. The built-in scale takes care of all the trouble and accurately calculates your tongue weight. The Weigh Safe Pintle Hitch features a pintle attachment that is constructed of high strength carbon steel. The bottom portion is chrome-plated and the latch is a powder coated in matte black for added corrosion resistance. The hitch offers an easy latching system to lock/unlock with a safety clip. In addition, this Pintle Hitch Kit includes 2" & 2-5/16" Stainless Steel tow balls, allowing you to tow a wide variety of trailers with your Weigh Safe Drop Hitch.
Features:
- Stainless Steel Tow Balls For Maximum Corrosion Resistance
- Pintle Attachment Is Constructed Of High-Strength Carbon Steel
- Proudly Made In The USA
- Includes Pintle Attachment And 2" & 2-5/16" Tow Balls
- Built-In Gauge To Measure Your Trailer's Tongue Weight
- V5 & J684 Certified
- Provides A Safer & More Pleasurable Towing Experience
What is tongue weight and why is it important?
Tongue weight (TW)
refers to the weight that the fully loaded trailer exerts downward on
the hitch ball of the tow vehicle. Tongue weight is typically 10 percent
- and should not exceed 15 percent - of your gross trailer weight. For
example, a 10,000-lb trailer should have a tongue weight between 1,000
lbs and 1,500 lbs. You can adjust the tongue weight of your trailer by
removing or adding cargo, or redistributing the load on the trailer. The
tongue weight should not exceed the capacity of your tow vehicle, your
hitch, or any of your towing components.
Simply put, too little
tongue weight can cause trailer sway and too much tongue weight can
cause the tow vehicle to perform poorly. You may have difficulty
steering, gaining traction, or braking when driving a setup that has too
much weight pushing down on the rear of the vehicle. Ultimately, towing
with an improper tongue weight can cause you to lose control of your
vehicle or cause your trailer to separate from the vehicle.
Kit Includes:
(1) Drawbar
(1) Slider with Gauge
(1) Dual Pin Key Lock Assembly with Keys
(1) Dust Lock Cover
(1) Ball Retaining Pin
(1) Pintle Attachment
(1) 2" Stainless Steel Ball
(1) 2-5/16" Stainless Steel Ball
Specifications:
Built-in Scale: Yes
Drop: 6"
Shaft: 2.5"
Ball: Pintle Attachment And 2" & 2-5/16" Tow Balls Included
Max GTW: 22,000 Lbs - Pintle Attachment (2.5" Shaft), 22,000 Lbs - 2-5/16" Tow Ball (2.5" Shaft), 8,000 lbs - 2" Ball
Max Tongue: 2,200 lbs (2.5" Shaft)
V5 & J684 certified: Yes
Drop Hitch Adjustment: 1" Increments
Weight: 35 lbs - 2.5" Shank with Pintle (6" Drop)
Pintle Attachment Material: High Strength Carbon Steel With Chrome Plating And Powder Coating
Pin: Dual Pin Key Lock Assembly Included
Rise: All Hitches May Be Used In Rise Position *Gain 1 Inch (E.G. 4" Drops Are 5" Rises)
Total Height: Add 3 Inches (*E.G. 4" Drops Measure 7" From The Top Of The Receiver To The Hitch Base)
Hitch Pin Hole: 5/8" Diameter
WARRANTY INFO:
Limited Lifetime
Note: The pintle attachment included with this hitch is not compatible with our aluminum weigh safe drop hitch and was designed to be used with our steel product line only. If used with any of our aluminum products, it will void warranty. Please note, warranty will also be voided if the pintle attachment is used with your hitch in the rise position.